Double sided wall sandwich panel
Double-sided sandwich panel is a type of panel that is used to cover the wall of industrial sheds and workshops. These types of sandwich panels are insulated using polyurethane, polystyrene and rock wool. Double-sided sandwich panel cover sheets are offered in different thicknesses. The double-sided sandwich panel should have the same thickness of the sheets used, otherwise the sandwich panel will have problems and the heavy sheets will bend towards the light side.
What is double-sided wall sandwich panel insulation?
Double-sided Diva sandwich panels are generally produced with polystyrene and polyurethane insulation. The selection of wall sandwich panel insulation is made according to the use of that panel and the customer’s order. Therefore, according to the customer’s request, it is possible to produce double-sided wall sandwich panels with rock wool insulation, and there is no limit in this field. If the wall sandwich panel is to be used in an environment where preventing energy loss is very important, stronger insulation such as polyurethane should be used. Also, if the heat transfer coefficient of sandwich panel insulation is a priority, you can use sandwich panels with rock wool insulation.
What is a double-sided wall sandwich panel?
Double-sided wall sandwich panels are panels that are covered with metal sheets for the top layer and the bottom layer. Double sheet sandwich panels have more resistance and strength than single sheet sandwich panels. The types of double-sided wall sandwich panels of Aria Baron Tos factory are:
- Double-sided aluminum wall sandwich panel
- Double sided galvanized wall sandwich panel
- Aluzinc double-sided wall sandwich panel
These sandwich panels are produced in different dimensions and sizes depending on their use. One of the most important issues that should be considered in the construction of double-sided sandwich panels is the quality and standard of the sheets. The thickness of the sheets on both sides in these panels must be the same, otherwise the heavier sheet may bend towards the lighter sheet. If such a situation occurs, the wall sandwich panel will have a problem and will not have the required efficiency. Therefore, it is recommended to pay special attention to the quality of the sheets and their thickness when buying a double-sided wall sandwich panel. By buying a variety of wall sandwich panels from a reliable sandwich panel manufacturer, you will no longer have to worry about its quality.
In what thicknesses are double-sided wall sandwich panels produced?
The thickness of the wall sandwich panel can be changed according to the customer’s needs. To determine the appropriate thickness for each sandwich panel, the purpose of using this panel must be known. For example, thicker wall and ceiling sandwich panels are used to cover the walls or roof of cold stores, because it is very important to prevent energy loss in cold stores.
Frequently Asked Double sided wall sandwich panel
What is the most common use of double-sided wall sandwich panels?
This category of sandwich panels has many applications due to their high resistance. They can be used to cover cold stores, build workshops, build sheds, containers, insulate fuel storage areas, etc. But due to the high thickness of the sheets and the greater resistance they get due to their thicker sheets, they can be used to insulate clean rooms (clean room) as well as food and medicine storage areas.
Aria Baron Toos, producer of all kinds of wall sandwich panels
Arya baron Production is one of the largest panel factories in Iran, a producer of modern construction materials with the launch of a production line of various types of wall panels in Mashhad.