Products

German Shadowline roof sandwich panel

With PUR or PIR polyurethane insulation

With rock wool insulation and without injection of foam on both edges

With rock wool insulation and foam injection at both edges

With polystyrene insulation and without injection of foam on both edges

With polystyrene insulation and by injecting foam at both edges

Features of shadowline roof sandwich panel

These sandwich panels have 3 important features. Those features are:

1.      Fast and easy installation

One of the biggest advantages of using Shadowline sandwich panels is their quick and easy installation. Shadowline sheet has high safety against physical accidents.

2.      Humidity resistant

Shadowline sandwich panels have a high resistance to moisture and are also resistant to impact and physical damage.

3.      Beautiful appearance and light weight

Shadowline sheets are very light in weight and lead to the beauty of the exterior of buildings. These sheets have a high variety in the market.

Shadowline sandwich panel

Shadowline sheet is one of the most different wavy designs that has a classic design similar to a trapezoid. For many years, this sheet has been used as the top layer of sandwich roof panels. Using Shadowline sandwich panels has many advantages. Increasing the resistance of the roof of the structure to physical damage, high resistance of this sheet to moisture, no breakage, quick and easy installation, high variety in design and color are the advantages of Shadowline sandwich panels.

In the past, Shadowline classic sheets were mostly used for implementation on ceiling sandwich panels, but today the applications of this sheet have expanded greatly and it can be implemented on different roofs. The issue of interest in the production of these sandwich panels is the number of trapezoids created in the sandwich panel. The greater the number of sandwich panel trapezoids, the greater the strength of the panel. A Shadowline roof sandwich panel must withstand the maximum pressure of live load and dead load imposed on the roof, so its strength and sufficient resistance are of particular importance. To produce Shadowline ceiling sandwich panels, several trapezoids are created in cold rolling on the sheet. Among the advantages of this type of sandwich panels, we can point out that the last step is an overlap, and the last step is considered one of the non-useful widths of this sandwich panel.

Roof sandwich panel

Shadowline sandwich panel, Italian design

Another product of Aria Barron Birch is Shadowline sandwich panels with an Italian design. This sandwich panel has the widest width among all types of sandwich panels; Its useful width is 1120 mm. The peak height of these sandwich panels is also 26 mm. The large width and low height have made these Shadowline sandwich panels cost-effective.

 

Shadowline sandwich panel Spain design:

  As the first Iranian manufacturer of sandwich panels, Aria Baron exclusively produces 5-step shadowline ceiling sandwich panels of the Spanish model. This type of shadowline ceiling sandwich panel, which has sufficient strength and stability for many projects, is based on the selection from the permitted loading table. The optimal use of polyurethane foam in the peaks has a more reasonable price.

Shadowline sandwich panel, German design:

  German Shadowline sandwich panels were among the first sandwich panels made with the classic Shadowline design. The useful width of this sandwich panel is 945 mm and the height of their peak is 40 mm. The higher peak height in the German sandwich panel has resulted in it being more expensive than the Italian shadowline panels. German Shadowline sandwich panels are produced with the following insulations:

  • PUR or PIR polyurethane insulation
  • Rock wool insulation without foam injection at the edges and rock wool insulation with foam injection at the edges
  • Polystyrene insulation without foam injection on the edges and polystyrene insulation with foam injection on both edges

Shadowline sandwich panel Turkish design:

This type of Shadowline sandwich panels produced by Aria Baron Toss is produced with a useful width of 1025 mm and has 5 steps or 5 trapezoids in its width. The main application of these sandwich panels is in the shed construction industry. According to the expected load bearing which can be taken from the loading table, the height of the peak of this type of roof sandwich panel is designed to be 32 mm to optimize costs. This action reduces the cost of making this type of Shadowline sandwich panel. These sandwich panels are produced with PUR or PIR polyurethane insulation.

Norway model Shadowline sandwich panel:

Among other exclusive products of Aria Baron Toos in the production of Shadowline ceiling sandwich panels, Norway model Shadowline have a reverse step (inward step). Its useful width is 1120 and the peak height of these panels is 20 mm. This sandwich panel is insulated with polyurethane. PUR or PIR are produced.